Norr model Rn1 Hook- Blade only

B078D8BC-EFA4-4F7B-9CEA-4786EBB18158
AF999828-D3AE-46C2-AB26-3F19C99E4130
A166EC2F-70C9-4F62-BDF5-A00761B0F5D5
E7B3F4EB-DE25-429D-967E-2A2DE08CABA0
B078D8BC-EFA4-4F7B-9CEA-4786EBB18158
AF999828-D3AE-46C2-AB26-3F19C99E4130
A166EC2F-70C9-4F62-BDF5-A00761B0F5D5
E7B3F4EB-DE25-429D-967E-2A2DE08CABA0

Norr model Rn1 Hook- Blade only

65.00

***Lead times around 40-60 days to ship ***

The Norr (Swedish for North) is the culmination of a summer of trial and error. My main goal was to produce a hook with attributes that would attract the widest array of carvers.

Bellied open sweep, with a slight distal taper.

I wanted the blade to have a deep enough bend, and set off the handle to reach deeper spoon bowls, but just enough “flat” to be used for those finishing cuts. Also, enough length to be choked up on for those cuts better done with the bent tip.

Blade has a hollow or rocker from edge to spine, and edge rail is polished to make sharpening easier.

Specs:

2-19/64 (58 mm)

19/32” (14 mm) at it widest.

.7/64” (2.8 mm) thick with a slight distal taper to the tip.

Top rail is polished to make sharpening easier.

Quantity:
Add To Cart